| Model number |
TE1000 |
| Frequency range |
0.5-150 mHz |
| Frequency resolution |
0.500-9.999 mHz in 1 kHz steps
10.00-99.99 mHz in 10 kHz steps
100.0-150.0 mHz in 100 kHz steps |
| Impedance range |
Measures impedance at any angle
Magnitude range 1Ω to 10k Ohm |
| Measurement speed |
Display updated every 500 milliseconds (approx.). |
| Typical accuracy of measurement |
The accuracy depends on the impedance being measured. Guaranteed accuracy for 3 standard impedances are listed below:
impedance=50 Ohm magnitude ±1%, angle ±1°
impedance=10 Ohm magnitude ±3%, angle ±3°
impedance=1 Ohm magnitude ±2%, angle ±3° |
| Measurement modes |
Complex impedance in polar or rectangular form
R-L-C in series or parallel equivalent circuit format
SWR for any system characteristic impedance
Complex relection coefficient for any system characteristic impedance
Return loss in dB for any system characteristic impedance
Swept measurements and data logging to PC via the RS232 serial port
/td> |
| SWR measurement range |
Greater than 100:1 (depends on system characteristic impedance) |
| Power source |
DC plug-pack or internal battery (auto power-save in battery mode) |
| Display |
80 character alphanumeric LCD |
| Measurement probe |
Active probe on 1 metre cable - allows direct in-circuit measurements |
| Interface |
RS232 on 9-pin D and USB connectors- software runs under Windows 95/98/XP |
| Weight |
1.9kg |
| Dimensions |
250w x 200d x 80h |
| Accessories |
Operation handbook (supplied)
Windows interface software permits sweep frequency measurements and data logging (supplied)
Coaxial adaptor (adapts the probe to plug directly onto an N-type 50 Ohm connector) (supplied)
Spring-loaded probe grounding pin
SMD tweezer fixture (optional extra)
Protective hard carry case with shoulder strap |
